stackeff

Fire Proofing



Fire Proofing Bournemouth

Advanced Safety Limited provide Passive fire protection services in Poole and Bournemouth, our products are used in building construction and help to resist, retard and isolate the spread offlames, smoke throughout the building.Formed in 1992 we have extensive experience of working in schools, hospitals, offices and general construction sites .. All our staff are product trained and have all relevant safety training and certification including CSCS, PASMA and IPAF.We have full Public Liability Insurance for your protection and peace of mind and we are approved installers for Firetherm, Envirograf, Firefly and Promat amongst others.

Passive Fire Protection Bournemouth

Passive fire protection is all about protecting your most important assets, your people and your property. The regulatory Reform (fire safety) order came into force on 1-10-2006. Under the Legislation, 'The Responsible Person' must carry out a Fire Risk Assessment and take general fire safety precautions to ensure the safety of building occupants and others who may be affected by the risk of a fire. Advanced Safety Limited can design, install and maintain all kinds of passive fire protection services including fire-resistant seals, Fire barriers, c1addings and coatings to all kinds of structures and buildings.

The use of high quality flame retardant materials with smoke prevention properties is a key requirement for Fire proofmg in Poole and Dorset, these measures can help with evacuation times in case of fire and reduce the damage to the building and its contents.

Our Services

At Advanced Safety Limited, we specialise in the supply and installation of passive fire, acoustic and air sealing systems which include:

Fire stopping of voids and service penetrations through walls and floors necessary for the compliance of regulatory reform (fire safety) order 2005 and building regulations part B.

Board encasement of structural steels using rigid and mineral fibre boards giving up to 4 hours protection.

Thin film intumescent painting of structural steels giving up to 2 hours protection.

Fire and Smoke cavity barriers to give resistance in roof and floor voids.

Intumescent mastic pointing.

Fire rated cladding of ductwork.

Air and smoke sealing of buildings.

Acoustic sealing between compartments to facilitate compliance with approved document part Land E respectively.

Wood fire protection giving either a class 0 or I rating, so that new or previously painted doors can be upgraded to class 0 or 1 in accordance with BS476 in a clear or paint finish, this can also be applied over existing coatings without the need for paint stripping.